Views: 80 Author: Site Editor Publish Time: 2020-09-01 Origin: Site
The main function of the inflating valve is to inflate and deflate the tire and keep the tire system tight after inflation. In daily vehicle maintenance, the maintenance of tire inflating valve also should not be ignored. It is better to replace the inflating valve regularly to reduce the hidden danger of driving safety.
The inflating valve is a kind of independent valve body device. When it is opened, it allows the gas to enter the space of tubeless tire or inner tube, and then automatically closes and seals the gas to generate the air pressure, so as to prevent the gas from escaping from the tire or inner tube. In addition to solid tires, other tires or inner tubes that must be inflated need to be inflated with this device.
According to the different structure, the valve can be divided into the following types.
It is the most widely used valve, commonly in cars, motorcycles, bicycles and other vehicles.
It is common on bicycles, especially on road bikes.
Bicycle valve, motorcycle, electric vehicle valve, car valve, truck bus valve, agricultural engineering vehicle valve, special valve, etc.
Tube valve and tubeless valve
Screw-on universal valve, clamp-in valve and snap-in valve
Ordinary core chamber valve and large core chamber valve
Dunlop/woods valve, Schrader Valve, Presta valve, German type and Italian type
Many drivers will ask the regular 4S shop to install the service tire pressure monitoring system, mainly because its detector can monitor the tire pressure at any time. Once the tire pressure is insufficient or too high, it will be displayed on the display. Is the inflating tire of tire monitoring system safe?
There are two kinds of tire monitor system. For the built-in installation, the tire should be removed. Because the sensor is installed on the steel ring inside the tire, so the tire can be replaced first, and then the dynamic balance monitoring can be performed. Although the tire valve will also be installed with the fume cock of tire pressure sensor after disassembly and assembly, it will not affect the function of the inflating valve, so be at ease.
The other is the external tire pressure monitor, which is installed without removing the tire and dynamic balance. The sensor is directly installed on the tire inflating valve, which will not affect the tire inflating valve, let alone air leakage.
Is it necessary to install TPMS system in automobile? The answer is yes. Because there are many accidents, which are caused by too high or too low tire pressure of automobile. It is safer to install tire pressure monitoring system. Then, it is better to regularly check whether the inflating valve and valve cap are normal, and keep the air sealing of the tires, so as to extend the service life of the tires and maintain the correct tire pressure.
